3 results
Clay resources in the Netherlands
- M.J. van der Meulen, D. Maljers, S.F. van Gessel, S.H.L.L. Gruijters
-
- Journal:
- Netherlands Journal of Geosciences / Volume 86 / Issue 2 / July 2007
- Published online by Cambridge University Press:
- 01 April 2016, pp. 117-130
-
- Article
-
- You have access Access
- Export citation
-
Clay is a common lithology in the Dutch shallow subsurface. It is used in earth constructions such as dikes, and as raw material for the fabrication of bricks, roof tiles etc. We present a new national assessment of Dutch clay resources, as part of a project that provides mineral-occurrence information for land-use planning purposes. The assessment is based on a 3D geological model, which consists of voxel cells with lithological composition as primary attribute, and has been obtained by interpolating data of more than 380,000 digital borehole descriptions. The occurrence of shell material and the extent to which clay is peaty were used as quality attributes, enabling us to tentatively distinguish between clay that is potentially suitable as ceramic material, and clay that is not.
As clay is extracted using dry (i.e. non-dredging) techniques, the model space has been dimensioned to fully encompass the unsaturated zone. A high-resolution model (with voxel cells of 250 · 250 · 0.2 m), based mainly on abundant, good-quality hand drillings, was constructed down to 3 m below the surface. This depth range suffices for clay-resource assessments in the lowlands, which have relatively high groundwater levels. Cells from a lower-resolution model (250 · 250 · 1 m, based on fewer data) were added to reach appropriate depths in upland areas.
We arrive at about 42.1 km3 of clay occurring in the model space (land areas only). Clay occurs mainly in the coastal domain and below the Rhine and Meuse river plains. Geological exploitability has been assessed within the unsaturated zone, taking overburden and intercalations with non-clay materials (especially peat) into account. The resulting exploitable stock is 12.3 to 18.0 (± 2.0) km3; an estimate in which the main source of uncertainty is presented by a lack of proper groundwater-table data. This amount equates to roughly 6000 annual consumption equivalents. Even when considering that the larger part of the clays is unsuitable for firing, and about one quarter is situated below built-up lands or nature preserves, clay is not a scarce resource in the Netherlands and supplies should present no problem in the near future.
3D geology in a 2D country: perspectives for geological surveying in the Netherlands
- M.J. van der Meulen, J.C. Doornenbal, J.L. Gunnink, J. Stafleu, J. Schokker, R.W. Vernes, F.C. van Geer, S.F. van Gessel, S. van Heteren, R.J.W. van Leeuwen, M.A.J. Bakker, P.J.F. Bogaard, F.S. Busschers, J. Griffioen, S.H.L.L. Gruijters, P. Kiden, B.M. Schroot, H.J. Simmelink, W.O. van Berkel, R.A.A. van der Krogt, W.E. Westerhoff, T.M. van Daalen
-
- Journal:
- Netherlands Journal of Geosciences / Volume 92 / Issue 4 / December 2013
- Published online by Cambridge University Press:
- 25 March 2014, pp. 217-241
-
- Article
-
- You have access Access
- Export citation
-
Over the last ten to twenty years, geological surveys all over the world have been entangled in a process of digitisation. Their paper archives, built over many decades, have largely been replaced by electronic databases. The systematic production of geological map sheets is being replaced by 3D subsurface modelling, the results of which are distributed electronically. In the Netherlands, this transition is both being accelerated and concluded by a new law that will govern management and utilisation of subsurface information. Under this law, the Geological Survey of the Netherlands has been commissioned to build a key register for the subsurface: a single national database for subsurface data and information, which Dutch government bodies are obliged to use when making policies or decisions that pertain to, or can be affected by the subsurface. This requires the Survey to rethink and redesign a substantial part of its operation: from data acquisition and interpretation to delivery. It has also helped shape our view on geological surveying in the future.
The key register, which is expected to start becoming operational in 2015, will contain vast quantities of subsurface data, as well as their interpretation into 3D models. The obligatory consultation of the register will raise user expectations of the reliability of all information it contains, and requires a strong focus on confidence issues. Building the necessary systems and meeting quality requirements is our biggest challenge in the upcoming years. The next step change will be towards building 4D models, which represent not only geological conditions in space, but also processes in time such as subsidence, anthropogenic effects, and those associated with global change.
Silica sand resources in the Netherlands
- M.J. van der Meulen, W.E. Westerhoff, A. Menkovic, S.H.L.L. Gruijters, C.W. Dubelaar, D. Maljers
-
- Journal:
- Netherlands Journal of Geosciences / Volume 88 / Issue 3 / November 2009
- Published online by Cambridge University Press:
- 24 March 2014, pp. 147-160
-
- Article
-
- You have access Access
- Export citation
-
Silica sand, (almost) pure quartz sand, is a valuable and scarce mineral resource within the shallow Dutch subsurface. High-grade deposits are exploited in the southeasternmost part of the country, as raw material for the glass, ceramic, chemical and other process industries. Dutch land-use policy requires that scarce mineral resources (including silica sand) are taken into consideration in spatial planning and when preparing for largescale engineering or construction works. For this purpose, and in order to review the long-term possibilities for home production of silica sand, we determined resource potential nationally.
Our approach was (1) to establish the relevant conditions and processes associated with the deposition of the currently exploited sands, (2) identify lithostratigraphic units that are genetically similar or are otherwise known to contain quartz-rich sands, and (3) query the Dutch geological survey's borehole database for potential silica sand occurrences within those units. As we have to rely on non-dedicated data, the latter step was undertaken using a largely qualitative set of lithological search parameters. Finally, a limited number of available chemical analyses was used for preliminary verification purposes.
Using this approach, we identified three prospective areas: one in the north of the province of Limburg and east of the province of Noord-Brabant(~750 km2), one in the central south of Noord-Brabant (~45 km2), and one in the east of the Gelderland and Overijssel provinces (~1,200 km2). For each area, first-order characteristics of possible silica sand resources are presented (type of deposit, depth, approximate thickness). In the terms of current reporting conventions, we resolved silica sand occurrence to the level of ‘reconnaissance mineral resource’ or ‘exploration result’, and our results do not constitute a formal resource declaration. Available chemical data suggest that the resources in the first two areas could be or become economic, although the grades are lower than those of the currently exploited resources. The third area is less promising in that respect, but available data is too limited to reject the area in this stage. Even so, we tentatively conclude that home production of silica sand can probably be maintained after the reserves in Limburg are depleted.